bootstrap.inc

<?php
// $Id$

/**
 * @file
 * Functions that need to be loaded on every Drupal request.
 */

/**
 * Indicates that the item should never be removed unless explicitly told to
 * using cache_clear_all() with a cache ID.
 */
define('CACHE_PERMANENT', 0);

/**
 * Indicates that the item should be removed at the next general cache wipe.
 */
define('CACHE_TEMPORARY', -1);

/**
 * Indicates that page caching is disabled.
 */
define('CACHE_DISABLED', 0);

/**
 * Indicates that page caching is enabled, using "normal" mode.
 */
define('CACHE_NORMAL', 1);

/**
 * Indicates that page caching is using "aggressive" mode. This bypasses
 * loading any modules for additional speed, which may break functionality in
 * modules that expect to be run on each page load.
 */
define('CACHE_AGGRESSIVE', 2);

/**
 * Log message severity -- Emergency: system is unusable.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_EMERG', 0);

/**
 * Log message severity -- Alert: action must be taken immediately.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_ALERT', 1);

/**
 * Log message severity -- Critical: critical conditions.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_CRITICAL', 2);

/**
 * Log message severity -- Error: error conditions.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_ERROR', 3);

/**
 * Log message severity -- Warning: warning conditions.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_WARNING', 4);

/**
 * Log message severity -- Notice: normal but significant condition.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_NOTICE', 5);

/**
 * Log message severity -- Informational: informational messages.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_INFO', 6);

/**
 * Log message severity -- Debug: debug-level messages.
 *
 * @see watchdog()
 * @see watchdog_severity_levels()
 */
define('WATCHDOG_DEBUG', 7);

/**
 * First bootstrap phase: initialize configuration.
 */
define('DRUPAL_BOOTSTRAP_CONFIGURATION', 0);

/**
 * Second bootstrap phase: try to call a non-database cache
 * fetch routine.
 */
define('DRUPAL_BOOTSTRAP_EARLY_PAGE_CACHE', 1);

/**
 * Third bootstrap phase: initialize database layer.
 */
define('DRUPAL_BOOTSTRAP_DATABASE', 2);

/**
 * Fourth bootstrap phase: identify and reject banned hosts.
 */
define('DRUPAL_BOOTSTRAP_ACCESS', 3);

/**
 * Fifth bootstrap phase: initialize session handling.
 */
define('DRUPAL_BOOTSTRAP_SESSION', 4);

/**
 * Sixth bootstrap phase: initialize the variable system.
 */
define('DRUPAL_BOOTSTRAP_VARIABLES', 5);

/**
 * Seventh bootstrap phase: load bootstrap.inc and module.inc, start
 * the variable system and try to serve a page from the cache.
 */
define('DRUPAL_BOOTSTRAP_LATE_PAGE_CACHE', 6);

/**
 * Eighth bootstrap phase: find out language of the page.
 */
define('DRUPAL_BOOTSTRAP_LANGUAGE', 7);

/**
 * Nineth bootstrap phase: set $_GET['q'] to Drupal path of request.
 */
define('DRUPAL_BOOTSTRAP_PATH', 8);

/**
 * Final bootstrap phase: Drupal is fully loaded; validate and fix
 * input data.
 */
define('DRUPAL_BOOTSTRAP_FULL', 9);

/**
 * Role ID for anonymous users; should match what's in the "role" table.
 */
define('DRUPAL_ANONYMOUS_RID', 1);

/**
 * Role ID for authenticated users; should match what's in the "role" table.
 */
define('DRUPAL_AUTHENTICATED_RID', 2);

/**
 * The number of bytes in a kilobyte. The scientific standard for kilo is 1000,
 * but used commonly in the field of computers to represent 1024 bits. For more
 * information on the different standards please visit:
 * http://en.wikipedia.org/wiki/Kilobyte.
 */
define('DRUPAL_KILOBYTE', 1024);

/**
 * No language negotiation. The default language is used.
 */
define('LANGUAGE_NEGOTIATION_NONE', 0);

/**
 * Path based negotiation with fallback to default language
 * if no defined path prefix identified.
 */
define('LANGUAGE_NEGOTIATION_PATH_DEFAULT', 1);

/**
 * Path based negotiation with fallback to user preferences
 * and browser language detection if no defined path prefix
 * identified.
 */
define('LANGUAGE_NEGOTIATION_PATH', 2);

/**
 * Domain based negotiation with fallback to default language
 * if no language identified by domain.
 */
define('LANGUAGE_NEGOTIATION_DOMAIN', 3);

/**
 * For convenience, define a short form of the request time global.
 */
define('REQUEST_TIME', $_SERVER['REQUEST_TIME']);

/**
 * @name Title text filtering flags
 * @{
 * Flags for use in drupal_set_title().
 */

/**
 * Flag for drupal_set_title(); text is not sanitized, so run check_plain().
 */
define('CHECK_PLAIN', 0);

/**
 * Flag for drupal_set_title(); text has already been sanitized.
 */
define('PASS_THROUGH', -1);

/**
 * Signals that the registry lookup cache should be reset.
 */
define('REGISTRY_RESET_LOOKUP_CACHE', 1);

/**
 * Signals that the registry lookup cache should be written to storage.
 */
define('REGISTRY_WRITE_LOOKUP_CACHE', 2);

/**
 * @} End of "Title text filtering flags".
 */


/**
 * Start the timer with the specified name. If you start and stop
 * the same timer multiple times, the measured intervals will be
 * accumulated.
 *
 * @param name
 *   The name of the timer.
 */
function timer_start($name) {
  global $timers;

  $timers[$name]['start'] = microtime(TRUE);
  $timers[$name]['count'] = isset($timers[$name]['count']) ? ++$timers[$name]['count'] : 1;
}

/**
 * Read the current timer value without stopping the timer.
 *
 * @param name
 *   The name of the timer.
 * @return
 *   The current timer value in ms.
 */
function timer_read($name) {
  global $timers;

  if (isset($timers[$name]['start'])) {
    $stop = microtime(TRUE);
    $diff = round(($stop - $timers[$name]['start']) * 1000, 2);

    if (isset($timers[$name]['time'])) {
      $diff += $timers[$name]['time'];
    }
    return $diff;
  }
}

/**
 * Stop the timer with the specified name.
 *
 * @param name
 *   The name of the timer.
 * @return
 *   A timer array. The array contains the number of times the
 *   timer has been started and stopped (count) and the accumulated
 *   timer value in ms (time).
 */
function timer_stop($name) {
  global $timers;

  $timers[$name]['time'] = timer_read($name);
  unset($timers[$name]['start']);

  return $timers[$name];
}

/**
 * Find the appropriate configuration directory.
 *
 * Try finding a matching configuration directory by stripping the website's
 * hostname from left to right and pathname from right to left. The first
 * configuration file found will be used; the remaining will ignored. If no
 * configuration file is found, return a default value '$confdir/default'.
 *
 * Example for a fictitious site installed at
 * http://www.drupal.org:8080/mysite/test/ the 'settings.php' is searched in
 * the following directories:
 *
 *  1. $confdir/8080.www.drupal.org.mysite.test
 *  2. $confdir/www.drupal.org.mysite.test
 *  3. $confdir/drupal.org.mysite.test
 *  4. $confdir/org.mysite.test
 *
 *  5. $confdir/8080.www.drupal.org.mysite
 *  6. $confdir/www.drupal.org.mysite
 *  7. $confdir/drupal.org.mysite
 *  8. $confdir/org.mysite
 *
 *  9. $confdir/8080.www.drupal.org
 * 10. $confdir/www.drupal.org
 * 11. $confdir/drupal.org
 * 12. $confdir/org
 *
 * 13. $confdir/default
 *
 * If a file named sites.php is present in the $confdir, it will be loaded
 * prior to scanning for directories. It should define an associative array
 * named $sites, which maps domains to directories. It should be in the form
 * of:
 *
 * $sites = array(
 *   'The url to alias' => 'A directory within the sites directory'
 * );
 *
 * For example:
 *
 * $sites = array(
 *   'devexample.com' => 'example.com',
 *   'localhost/example' => 'example.com',
 * );
 *
 * The above array will cause Drupal to look for a directory named
 * "example.com" in the sites directory whenever a request comes from
 * "example.com", "devexample.com", or "localhost/example". That is useful
 * on development servers, where the domain name may not be the same as the
 * domain of the live server. Since Drupal stores file paths into the database
 * (files, system table, etc.) this will ensure the paths are correct while
 * accessed on development servers.
 *
 * @param $require_settings
 *   Only configuration directories with an existing settings.php file
 *   will be recognized. Defaults to TRUE. During initial installation,
 *   this is set to FALSE so that Drupal can detect a matching directory,
 *   then create a new settings.php file in it.
 * @param reset
 *   Force a full search for matching directories even if one had been
 *   found previously.
 * @return
 *   The path of the matching directory.
 */
function conf_path($require_settings = TRUE, $reset = FALSE) {
  static $conf = '';

  if ($conf && !$reset) {
    return $conf;
  }

  $confdir = 'sites';

  $sites = array();
  if (file_exists(DRUPAL_ROOT . '/' . $confdir . '/sites.php')) {
    // This will overwrite $sites with the desired mappings.
    include(DRUPAL_ROOT . '/' . $confdir . '/sites.php');
  }

  $uri = explode('/', $_SERVER['SCRIPT_NAME'] ? $_SERVER['SCRIPT_NAME'] : $_SERVER['SCRIPT_FILENAME']);
  $server = explode('.', implode('.', array_reverse(explode(':', rtrim($_SERVER['HTTP_HOST'], '.')))));
  for ($i = count($uri) - 1; $i > 0; $i--) {
    for ($j = count($server); $j > 0; $j--) {
      $dir = implode('.', array_slice($server, -$j)) . implode('.', array_slice($uri, 0, $i));
      if (isset($sites[$dir]) && file_exists(DRUPAL_ROOT . '/' . $confdir . '/' . $sites[$dir])) {
        $dir = $sites[$dir];
      }
      if (file_exists(DRUPAL_ROOT . '/' . $confdir . '/' . $dir . '/settings.php') || (!$require_settings && file_exists(DRUPAL_ROOT . '/' . $confdir . '/' . $dir))) {
        $conf = "$confdir/$dir";
        return $conf;
      }
    }
  }
  $conf = "$confdir/default";
  return $conf;
}

/**
 * Initialize variables needed for the rest of the execution.
 */
function drupal_initialize_variables() {
  if (!isset($_SERVER['HTTP_REFERER'])) {
    $_SERVER['HTTP_REFERER'] = '';
  }
  if (!isset($_SERVER['SERVER_PROTOCOL']) || ($_SERVER['SERVER_PROTOCOL'] != 'HTTP/1.0' && $_SERVER['SERVER_PROTOCOL'] != 'HTTP/1.1')) {
    $_SERVER['SERVER_PROTOCOL'] = 'HTTP/1.0';
  }
  // Enforce E_ALL, but allow users to set levels not part of E_ALL.
  error_reporting(E_ALL | error_reporting());

  // Override PHP settings required for Drupal to work properly.
  // sites/default/default.settings.php contains more runtime settings.
  // The .htaccess file contains settings that cannot be changed at runtime.

  // Prevent PHP from generating HTML error messages.
  ini_set('html_errors', 0);
  // Don't escape quotes when reading files from the database, disk, etc.
  ini_set('magic_quotes_runtime', '0');
  // Use session cookies, not transparent sessions that puts the session id in
  // the query string.
  ini_set('session.use_only_cookies', '1');
  ini_set('session.use_trans_sid', '1');
  // Don't send HTTP headers using PHP's session handler.
  ini_set('session.cache_limiter', 'none');
}

/**
 * Validate that $_SERVER['HTTP_HOST'] is safe.
 *
 * As $_SERVER['HTTP_HOST'] is user input, ensure it only contains characters
 * allowed in hostnames. See RFC 952 (and RFC 2181). $_SERVER['HTTP_HOST'] is
 * lowercased.
 *
 * @return
 *  TRUE if only containing valid characters, or FALSE otherwise.
 */
function drupal_valid_http_host() {
  $_SERVER['HTTP_HOST'] = strtolower($_SERVER['HTTP_HOST']);
  return preg_match('/^\[?(?:[a-z0-9-:\]_]+\.?)+$/', $_SERVER['HTTP_HOST']);
}

/**
 * Loads the configuration and sets the base URL, cookie domain, and
 * session name correctly.
 */
function conf_init() {
  global $base_url, $base_path, $base_root;

  // Export the following settings.php variables to the global namespace
  global $databases, $db_prefix, $cookie_domain, $conf, $installed_profile, $update_free_access;
  $conf = array();

  if (!drupal_valid_http_host()) {
    // HTTP_HOST is invalid, e.g. if containing slashes it may be an attack.
    header($_SERVER['SERVER_PROTOCOL'] . ' 400 Bad Request');
    exit;
  }

  if (file_exists(DRUPAL_ROOT . '/' . conf_path() . '/settings.php')) {
    include_once DRUPAL_ROOT . '/' . conf_path() . '/settings.php';
  }

  if (isset($base_url)) {
    // Parse fixed base URL from settings.php.
    $parts = parse_url($base_url);
    if (!isset($parts['path'])) {
      $parts['path'] = '';
    }
    $base_path = $parts['path'] . '/';
    // Build $base_root (everything until first slash after "scheme://").
    $base_root = substr($base_url, 0, strlen($base_url) - strlen($parts['path']));
  }
  else {
    // Create base URL
    $base_root = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';

    $base_url = $base_root .= '://' . $_SERVER['HTTP_HOST'];

    // $_SERVER['SCRIPT_NAME'] can, in contrast to $_SERVER['PHP_SELF'], not
    // be modified by a visitor.
    if ($dir = trim(dirname($_SERVER['SCRIPT_NAME']), '\,/')) {
      $base_path = "/$dir";
      $base_url .= $base_path;
      $base_path .= '/';
    }
    else {
      $base_path = '/';
    }
  }

  if ($cookie_domain) {
    // If the user specifies the cookie domain, also use it for session name.
    $session_name = $cookie_domain;
  }
  else {
    // Otherwise use $base_url as session name, without the protocol
    // to use the same session identifiers across http and https.
    list( , $session_name) = explode('://', $base_url, 2);
    // We escape the hostname because it can be modified by a visitor.
    if (!empty($_SERVER['HTTP_HOST'])) {
      $cookie_domain = check_plain($_SERVER['HTTP_HOST']);
    }
  }
  // To prevent session cookies from being hijacked, a user can configure the
  // SSL version of their website to only transfer session cookies via SSL by
  // using PHP's session.cookie_secure setting. The browser will then use two
  // separate session cookies for the HTTPS and HTTP versions of the site. So we
  // must use different session identifiers for HTTPS and HTTP to prevent a
  // cookie collision.
  if (ini_get('session.cookie_secure')) {
    $session_name .= 'SSL';
  }
  // Strip leading periods, www., and port numbers from cookie domain.
  $cookie_domain = ltrim($cookie_domain, '.');
  if (strpos($cookie_domain, 'www.') === 0) {
    $cookie_domain = substr($cookie_domain, 4);
  }
  $cookie_domain = explode(':', $cookie_domain);
  $cookie_domain = '.' . $cookie_domain[0];
  // Per RFC 2109, cookie domains must contain at least one dot other than the
  // first. For hosts such as 'localhost' or IP Addresses we don't set a cookie domain.
  if (count(explode('.', $cookie_domain)) > 2 && !is_numeric(str_replace('.', '', $cookie_domain))) {
    ini_set('session.cookie_domain', $cookie_domain);
  }
  session_name('SESS' . md5($session_name));
}

/**
 * Returns and optionally sets the filename for a system item (module,
 * theme, etc.). The filename, whether provided, cached, or retrieved
 * from the database, is only returned if the file exists.
 *
 * This function plays a key role in allowing Drupal's resources (modules
 * and themes) to be located in different places depending on a site's
 * configuration. For example, a module 'foo' may legally be be located
 * in any of these three places:
 *
 * modules/foo/foo.module
 * sites/all/modules/foo/foo.module
 * sites/example.com/modules/foo/foo.module
 *
 * Calling drupal_get_filename('module', 'foo') will give you one of
 * the above, depending on where the module is located.
 *
 * @param $type
 *   The type of the item (i.e. theme, theme_engine, module).
 * @param $name
 *   The name of the item for which the filename is requested.
 * @param $filename
 *   The filename of the item if it is to be set explicitly rather
 *   than by consulting the database.
 *
 * @return
 *   The filename of the requested item.
 */
function drupal_get_filename($type, $name, $filename = NULL) {
  static $files = array();

  if (!isset($files[$type])) {
    $files[$type] = array();
  }

  if (!empty($filename) && file_exists($filename)) {
    $files[$type][$name] = $filename;
  }
  elseif (isset($files[$type][$name])) {
    // nothing
  }
  // Verify that we have an active database connection, before querying
  // the database. This is required because this function is called both
  // before we have a database connection (i.e. during installation) and
  // when a database connection fails.
  elseif (db_is_active() && (($file = db_query("SELECT filename FROM {system} WHERE name = :name AND type = :type", array(':name' => $name, ':type' => $type))->fetchField()) && file_exists($file))) {
    $files[$type][$name] = $file;
  }
  else {
    // Fallback to searching the filesystem if the database connection is
    // not established or the requested file is not found.
    $config = conf_path();
    $dir = (($type == 'theme_engine') ? 'themes/engines' : "${type}s");
    $file = (($type == 'theme_engine') ? "$name.engine" : "$name.$type");

    foreach (array("$config/$dir/$file", "$config/$dir/$name/$file", "$dir/$file", "$dir/$name/$file") as $file) {
      if (file_exists($file)) {
        $files[$type][$name] = $file;
        break;
      }
    }
  }

  if (isset($files[$type][$name])) {
    return $files[$type][$name];
  }
}

/**
 * Load the persistent variable table.
 *
 * The variable table is composed of values that have been saved in the table
 * with variable_set() as well as those explicitly specified in the configuration
 * file.
 */
function variable_init($conf = array()) {
  // NOTE: caching the variables improves performance by 20% when serving cached pages.
  if ($cached = cache_get('variables', 'cache')) {
    $variables = $cached->data;
  }
  else {
    $variables = array_map('unserialize', db_query('SELECT name, value FROM {variable}')->fetchAllKeyed());
    cache_set('variables', $variables);
  }

  foreach ($conf as $name => $value) {
    $variables[$name] = $value;
  }

  return $variables;
}

/**
 * Return a persistent variable.
 *
 * @param $name
 *   The name of the variable to return.
 * @param $default
 *   The default value to use if this variable has never been set.
 * @return
 *   The value of the variable.
 */
function variable_get($name, $default) {
  global $conf;

  return isset($conf[$name]) ? $conf[$name] : $default;
}

/**
 * Set a persistent variable.
 *
 * @param $name
 *   The name of the variable to set.
 * @param $value
 *   The value to set. This can be any PHP data type; these functions take care
 *   of serialization as necessary.
 */
function variable_set($name, $value) {
  global $conf;

  db_merge('variable')->key(array('name' => $name))->fields(array('value' => serialize($value)))->execute();

  cache_clear_all('variables', 'cache');

  $conf[$name] = $value;
}

/**
 * Unset a persistent variable.
 *
 * @param $name
 *   The name of the variable to undefine.
 */
function variable_del($name) {
  global $conf;

  db_delete('variable')
    ->condition('name', $name)
    ->execute();
  cache_clear_all('variables', 'cache');

  unset($conf[$name]);
}


/**
 * Retrieve the current page from the cache.
 *
 * Note: we do not serve cached pages when status messages are waiting (from
 * a redirected form submission which was completed).
 */
function page_get_cache() {
  global $user, $base_root;

  $cache = NULL;

  if (!$user->uid && ($_SERVER['REQUEST_METHOD'] == 'GET' || $_SERVER['REQUEST_METHOD'] == 'HEAD') && count(drupal_set_message()) == 0) {
    $cache = cache_get($base_root . request_uri(), 'cache_page');

    if (empty($cache)) {
      ob_start();
    }
  }

  return $cache;
}

/**
 * Includes a file with the provided type and name. This prevents
 * including a theme, engine, module, etc., more than once.
 *
 * @param $type
 *   The type of item to load (i.e. theme, theme_engine, module).
 * @param $name
 *   The name of the item to load.
 *
 * @return
 *   TRUE if the item is loaded or has already been loaded.
 */
function drupal_load($type, $name) {
  static $files = array();

  if (isset($files[$type][$name])) {
    return TRUE;
  }

  $filename = drupal_get_filename($type, $name);

  if ($filename) {
    include_once DRUPAL_ROOT . '/' . $filename;
    $files[$type][$name] = TRUE;

    return TRUE;
  }

  return FALSE;
}

/**
 * Set HTTP headers in preparation for a page response.
 *
 * Authenticated users are always given a 'no-cache' header, and will
 * fetch a fresh page on every request. This prevents authenticated
 * users seeing locally cached pages that show them as logged out.
 *
 * @see page_set_cache()
 */
function drupal_page_header() {
  header("Expires: Sun, 19 Nov 1978 05:00:00 GMT");
  header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
  header("Cache-Control: store, no-cache, must-revalidate");
  header("Cache-Control: post-check=0, pre-check=0", FALSE);
}

/**
 * Set HTTP headers in preparation for a cached page response.
 *
 * The general approach here is that anonymous users can keep a local
 * cache of the page, but must revalidate it on every request. Then,
 * they are given a '304 Not Modified' response as long as they stay
 * logged out and the page has not been modified.
 *
 */
function drupal_page_cache_header($cache) {
  // Create entity tag based on cache update time.
  $etag = '"' . md5($cache->created) . '"';

  // See if the client has provided the required HTTP headers.
  $if_modified_since = isset($_SERVER['HTTP_IF_MODIFIED_SINCE']) ? strtotime($_SERVER['HTTP_IF_MODIFIED_SINCE']) : FALSE;
  $if_none_match = isset($_SERVER['HTTP_IF_NONE_MATCH']) ? stripslashes($_SERVER['HTTP_IF_NONE_MATCH']) : FALSE;

  if ($if_modified_since && $if_none_match
      && $if_none_match == $etag // etag must match
      && $if_modified_since == $cache->created) {  // if-modified-since must match
    header($_SERVER['SERVER_PROTOCOL'] . ' 304 Not Modified');
    // All 304 responses must send an etag if the 200 response for the same object contained an etag
    header("Etag: $etag");
    return;
  }

  // Send appropriate response:
  header("Last-Modified: " . gmdate(DATE_RFC1123, $cache->created));
  header("ETag: $etag");

  // The following headers force validation of cache:
  header("Expires: Sun, 19 Nov 1978 05:00:00 GMT");
  header("Cache-Control: must-revalidate");

  if (variable_get('page_compression', TRUE)) {
    // Determine if the browser accepts gzipped data.
    if (@strpos($_SERVER['HTTP_ACCEPT_ENCODING'], 'gzip') === FALSE && function_exists('gzencode')) {
      // Strip the gzip header and run uncompress.
      $cache->data = gzinflate(substr(substr($cache->data, 10), 0, -8));
    }
    elseif (function_exists('gzencode')) {
      header('Content-Encoding: gzip');
    }
  }

  // Send the original request's headers. We send them one after
  // another so PHP's header() function can deal with duplicate
  // headers.
  $headers = explode("\n", $cache->headers);
  foreach ($headers as $header) {
    header($header);
  }

  print $cache->data;
}

/**
 * Unserializes and appends elements from a serialized string.
 *
 * @param $obj
 *   The object to which the elements are appended.
 * @param $field
 *   The attribute of $obj whose value should be unserialized.
 */
function drupal_unpack($obj, $field = 'data') {
  if ($obj->$field && $data = unserialize($obj->$field)) {
    foreach ($data as $key => $value) {
      if (!isset($obj->$key)) {
        $obj->$key = $value;
      }
    }
  }
  return $obj;
}

/**
 * Encode special characters in a plain-text string for display as HTML.
 *
 * Uses drupal_validate_utf8 to prevent cross site scripting attacks on
 * Internet Explorer 6.
 */
function check_plain($text) {
  return drupal_validate_utf8($text) ? htmlspecialchars($text, ENT_QUOTES) : '';
}

/**
 * Checks whether a string is valid UTF-8.
 *
 * All functions designed to filter input should use drupal_validate_utf8
 * to ensure they operate on valid UTF-8 strings to prevent bypass of the
 * filter.
 *
 * When text containing an invalid UTF-8 lead byte (0xC0 - 0xFF) is presented
 * as UTF-8 to Internet Explorer 6, the program may misinterpret subsequent
 * bytes. When these subsequent bytes are HTML control characters such as
 * quotes or angle brackets, parts of the text that were deemed safe by filters
 * end up in locations that are potentially unsafe; An onerror attribute that
 * is outside of a tag, and thus deemed safe by a filter, can be interpreted
 * by the browser as if it were inside the tag.
 *
 * The function does not return FALSE for strings containing character codes
 * above U+10FFFF, even though these are prohibited by RFC 3629.
 *
 * @param $text
 *   The text to check.
 * @return
 *   TRUE if the text is valid UTF-8, FALSE if not.
 */
function drupal_validate_utf8($text) {
  if (strlen($text) == 0) {
    return TRUE;
  }
  // With the PCRE_UTF8 modifier 'u', preg_match() fails silently on strings
  // containing invalid UTF-8 byte sequences. It does not reject character
  // codes above U+10FFFF (represented by 4 or more octets), though.
  return (preg_match('/^./us', $text) == 1);
}

/**
 * Since $_SERVER['REQUEST_URI'] is only available on Apache, we
 * generate an equivalent using other environment variables.
 */
function request_uri() {

  if (isset($_SERVER['REQUEST_URI'])) {
    $uri = $_SERVER['REQUEST_URI'];
  }
  else {
    if (isset($_SERVER['argv'])) {
      $uri = $_SERVER['SCRIPT_NAME'] . '?' . $_SERVER['argv'][0];
    }
    elseif (isset($_SERVER['QUERY_STRING'])) {
      $uri = $_SERVER['SCRIPT_NAME'] . '?' . $_SERVER['QUERY_STRING'];
    }
    else {
      $uri = $_SERVER['SCRIPT_NAME'];
    }
  }

  return $uri;
}

/**
 * Log a system message.
 *
 * @param $type
 *   The category to which this message belongs.
 * @param $message
 *   The message to store in the log. See t() for documentation
 *   on how $message and $variables interact. Keep $message
 *   translatable by not concatenating dynamic values into it!
 * @param $variables
 *   Array of variables to replace in the message on display or
 *   NULL if message is already translated or not possible to
 *   translate.
 * @param $severity
 *   The severity of the message, as per RFC 3164
 * @param $link
 *   A link to associate with the message.
 *
 * @see watchdog_severity_levels()
 */
function watchdog($type, $message, $variables = array(), $severity = WATCHDOG_NOTICE, $link = NULL) {
  global $user, $base_root;

  static $in_error_state = FALSE;

  // It is possible that the error handling will itself trigger an error. In that case, we could
  // end up in an infinite loop. To avoid that, we implement a simple static semaphore.
  if (!$in_error_state) {
    $in_error_state = TRUE;

    // Prepare the fields to be logged
    $log_message = array(
      'type'        => $type,
      'message'     => $message,
      'variables'   => $variables,
      'severity'    => $severity,
      'link'        => $link,
      'user'        => $user,
      'request_uri' => $base_root . request_uri(),
      'referer'     => $_SERVER['HTTP_REFERER'],
      'ip'          => ip_address(),
      'timestamp'   => REQUEST_TIME,
    );

    // Call the logging hooks to log/process the message
    foreach (module_implements('watchdog', TRUE) as $module) {
      module_invoke($module, 'watchdog', $log_message);
    }

    // It is critical that the semaphore is only cleared here, in the parent
    // watchdog() call (not outside the loop), to prevent recursive execution.
    $in_error_state = FALSE;
  }
}

/**
 * Set a message which reflects the status of the performed operation.
 *
 * If the function is called with no arguments, this function returns all set
 * messages without clearing them.
 *
 * @param $message
 *   The message should begin with a capital letter and always ends with a
 *   period '.'.
 * @param $type
 *   The type of the message. One of the following values are possible:
 *   - 'status'
 *   - 'warning'
 *   - 'error'
 * @param $repeat
 *   If this is FALSE and the message is already set, then the message won't
 *   be repeated.
 */
function drupal_set_message($message = NULL, $type = 'status', $repeat = TRUE) {
  if ($message) {
    if (!isset($_SESSION['messages'])) {
      $_SESSION['messages'] = array();
    }

    if (!isset($_SESSION['messages'][$type])) {
      $_SESSION['messages'][$type] = array();
    }

    if ($repeat || !in_array($message, $_SESSION['messages'][$type])) {
      $_SESSION['messages'][$type][] = $message;
    }
  }

  // messages not set when DB connection fails
  return isset($_SESSION['messages']) ? $_SESSION['messages'] : NULL;
}

/**
 * Return all messages that have been set.
 *
 * @param $type
 *   (optional) Only return messages of this type.
 * @param $clear_queue
 *   (optional) Set to FALSE if you do not want to clear the messages queue
 * @return
 *   An associative array, the key is the message type, the value an array
 *   of messages. If the $type parameter is passed, you get only that type,
 *   or an empty array if there are no such messages. If $type is not passed,
 *   all message types are returned, or an empty array if none exist.
 */
function drupal_get_messages($type = NULL, $clear_queue = TRUE) {
  if ($messages = drupal_set_message()) {
    if ($type) {
      if ($clear_queue) {
        unset($_SESSION['messages'][$type]);
      }
      if (isset($messages[$type])) {
        return array($type => $messages[$type]);
      }
    }
    else {
      if ($clear_queue) {
        unset($_SESSION['messages']);
      }
      return $messages;
    }
  }
  return array();
}

/**
 * Check to see if an IP address has been blocked.
 *
 * Blocked IP addresses are stored in the database by default. However for
 * performance reasons we allow an override in settings.php. This allows us